Elcometer 355 Standard Coating Thickness Gauges

The unit's large memory stores up to 5,000 readings in batches and data can be output to PC, datalogger or printer as required.

A full selection of Probe Modules allows choice for your application. All modules are supplied with calibration foils.

±1% Accuracy
Rugged Aluminium Case
Traceable Thickness Standards
ElcoMaster™ Software Supplied
5,000 reading memory in 25 pre-set batches.
Full statistical analysis - mean, standard deviation, number of readings, highest and lowest value.
RS232 Printer/PC Output - Serial and Parallel
Date and time information

	Metric	Imperial
Dimensions	175 x 83 x 42mm	6.9 x 3.3 x 1.6”
Weight	650g	1.43lbs
Operating Temperature	0 to 50°C	32 to 120°F
Storage Temperature	-10 to 60°C	14 to 140°F
Data output	RS232C Serial or Parallel Output via 25p Way D Type Connector (Female)
Batteries	3 x 1.5V AA Cells (Alkaline) or 3 x 1.5V Nickel Metal Hydride rechargeable cells
Part Numbers	Elcometer 355 Standard Coating Thickness Gauge		A355----S
	Elcometer 355 Top Coating Thickness Gauge		A355----T
The Elcometer 355 is not supplied with a probe, please select a probe by clicking on the probe link at the bottom of the page.