The Elcometer 345 2 Key Gauge, has been specifically designed for the Steel Structures Industry for measuring the coating thickness of structural steel. It can be used to test the wide variety of coatings and coating systems used to on bridges, ships, buildings, etc. The Elcometer 345 SSG comes complete with a one year warranty and has two operating modes:
* Zero Offset, USA Patent Number 6243661 |
Specifications
Range
|
Resolution
|
Accuracy*
|
Part Number
|
||||
µm
|
mils
|
Metric
|
Imperial
|
Metric
|
Imperial
|
||
Elcometer 345 Ferrous Integral |
0 – 1500
|
0 – 60
|
0.1µm up to 20µm
|
0.01mil up to 1.0 mils
|
±1-3% or 2.5µm
|
±1-3% or ±0.1mils
|
A345FB-I1
|
Elcometer 345 Ferrous Separate |
0 – 1500
|
0 – 60
|
A345FB-S1
|
||||
Elcometer 345 Non-Ferrous Integral |
0 – 1500
|
0 – 60
|
0.1µm up to 20µm
|
0.01mil up to 1.0 mils
|
±1-3% or 2.5µm
|
±1-3% or ±0.1mils
|
A345NB-I1
|
Elcometer 345 Non-Ferrous Separate |
0 – 1500
|
0 – 60
|
A345NB-S1
|
||||
Elcometer 345 Dual FNF Integral** |
0 – 1500
|
0 – 60
|
0.1µm up to 20µm
|
0.01mil up to 1.0 mils
|
±1-3% or 2.5µm
|
±1-3% or ±0.1mils
|
A345FNFBI1
|
Elcometer 345 Dual FNF Separate** |
0 – 1500
|
0 – 60
|
A345FNFBS1
|
||||
*1% when calibrated close to the required thickness, 3% across the range ** FNF Patent Number GB 2306009B. USA 5886522 |
Standards
Can be used in accordance with:
|
||
FERROUS |
NON-FERROUS (NF) | DUAL FERROUS and NON-FERROUS (FNF) |
ASTM B 499 BS 5411-11 BS 3900-C5-6Aa BS EN ISO 1461 DIN 50981 ISO 2178 ISO 2808-6Aa prEN ISO 19840 |
ASTM D 1400 ASTM B 244 BS 5411-3 BS 3900-C5-6Ba BS 5599 DIN 50984 ISO 2360 ISO 2808-6Ba |
All the F |