These robust, hand held instruments are used for measuring the thickness of materials where access to only one side of the test piece is available. Many different materials can be measured including steel, cast iron, plastic, epoxy resin and glass fibre, etc.

  • Three calibration options - Single Point Calibration, Two Point Calibration, Speed of Sound
  • Hand held and robust
  • Backlight display on all versions
  • Data output available on the Elcometer 206 and 206DL. ElcoMaster™ and EDTS+ Excel Link software supplied free of charge with the Elcometer 206DL
  • Memory capacity of 1000 readings on 206DL

 

Specifications:

Maximum Measurement Range
0.63 - 500mm (0.025 - 19.999") (dependent on transducer and material)
Velocity Range
1250 - 10000m/s (0.0492 - 0.3930 in/µs)
Accuracy
±0.01mm (0.001") (Depends on material and conditions)
Resolution
0.01mm (0.001")
Units
millimetres and inches
Operating Temperature
-20 to 50°C (-4 to 120°F)
Keypad type
Sealed Membrane
Display
4½ Digit Liquid Crystal Display with Backlight
Transducer
Select from Transducer Link
Power
AA 1.5V Alkaline or 1.2V NiCad cell
Battery Life
200hrs Alkaline (120hrs NiCad)
Weight
295g (10oz)
Size
63.5 x 120.6 x 31.75mm (2.5 x 4.75 x 1.25")
Case Type
Extruded aluminium

Elcometer 205

Elcometer 206

Elcometer 206DL

High Speed Scan Mode

l

l

l

Differential Mode

l

l

Alarm Mode

l

l

Data Output

l

l

Data-Logging

l

EDTS+ Excel link Software

¯

l

ElcoMaster™ Software

¯

l

Part Numbers

C205----1

C206----1

C206DL----1

Accessories

Ultrasonic Couplant (120ml / 4oz) T92015701
High Temperature Ultrasonic Couplant (60ml / 2oz) T92015874
Test Wedge 2 – 25mm T9205243-
Test Wedge 30 – 100mm T9205270-
l Included  ¯ Optional

Products Menu

Rentals Menu