1. You are here:  
  2. Home/
  3. Hardness Testing/
  4. Portable Hardness Testers/
  5. Products/
  6. Portable Hardness Testers/
  7. Pen Type Leeb Hardness Tester TIME®5100/5102/5104

Portable Hardness Testers

Features

● Light Mini Unit with simple menu, easy and convenient to use

● Conversion of hardness scales(HL, HV, HB, HRC, HRB and HS)

● USB interface to connect the PC, assisted by Software Dataview TH51X (especially for TH51X series Hardness Test) with both online measurement and offline data analysis mode：curve chart, data sheet, setting of tolerance limit and data report are available.

● Connected to Printer by RS 232 and test values can be printed directly

● Measuring Direction:Any direction 360°

● Automatic identification of impact test direction

● Memory of 270 data in 9 group

● Backlight for convenience in darkness

● Upper /lower limits setting

● AAA 1.5V battery, whose capacity shown in display

● Auto power off

● TIME®5100: integrated with D impact device for the majority of hardness testing requirements

● TIME®5102: integrated with C impact device for hardness testing on thin, light and surface hardened components

● TIME®5104: integrated with DL impact device for hardness testing of deep grooves and tooth surface

 

Standard Delivery

　

Optional Accessory

Main unit  

1

Support rings

Test block HLD  

1

Dataview Software

USB connecting cable  

1

 

Cleaning brush  

1

 

Battery AAA 1.5V 

2

 

TIME certificate 

1

 

Warranty card  

1

 

Instruction manual 

1
Model TIME ® 5100 TIME ® 5102 TIME ® 5104
Impact device  D integrated C integrated DL integrated
Hardness scales HLD, HB, HRC, HRB,HV, HS HLC, HB, HRC, HRB, HV, HS HLDL, HB, HRC, HRB,HV, HS
Accuracy  ±6HLD(760 ±30HLD) ±12HLC ±12HLD
Memory  270 average readings in 9 group files
Output RS232 to printer
Min. surface roughness of work piece 1.6μm ( Ra) 0.4μm ( Ra) 1.6μm ( Ra)
Max. work piece hardness  960HLD  960HLC 950HLDL
Min. radius of work piece (convex/concave) Rmin = 50mm (with support ring Rmin=10mm) Rmin=11mm (with support ring ) Rmin = 10mm (with support ring Rmin=10mm)
Min. work piece weight

2~5kg on stable support

0.05~2kg with compact coupling

0.5~1.5kg on stable support

0.02~0.5kg with compact coupling

2~5kg on stable support

0.05~2kg with compact coupling
Min. work piece thickness coupled  5mm 1mm 5mm
Min. thickness of hardened layers   0.8mm  0.2mm 0.8mm
Indentation depth  Impact devices data 
Continuous working time 8h (without backlight)
Power AAA 1.5V batteries
Operating temperature  0~40℃
Dimensions (mm)  155×55×25 160×60×25 215×60×25
Weight (g)  180

 

Products Menu

Rentals Menu